| 技術性能參數 Technical Performance Parameters | ||||
| 概 要 General | 制造商 Manufacturer | 無錫錫合叉車機械有限公司 | ||
| 型號 Model | CPCD60 | |||
| 動力形式 Power Type | 柴油 Diesel | |||
| 額定起重量 Load Capacity | kg | 6000 | ||
| 載荷中心距 Load Center | mm | 600 | ||
| 尺寸 Dimension | 起升高度 Lift HeightB | mm | 3000 | |
| 自由起升高度 Free Lift HeightE | mm | 160 | ||
| 貨叉尺寸 Fork SizeJ×U×F | mm | 1220×150×60 | ||
| 門架傾角 Mast Tilt Angleα/β | deg | 6°/12° | ||
| 前懸距 Front OverhangK | mm | 623 | ||
| 后懸距 Rear OverhangM | mm | 600 | ||
| 外形尺寸 Overall Dimension | 總長 Length to face of forkH | mm | 4945 | |
| 總寬 Overall WidthQ | mm | 1990 | ||
| 門架不起升高度 Mast Lowered HeightQ | mm | 2545 | ||
| 門架起升時高度 Mast Extended HeightA | mm | 4395 | ||
| 安全架高度 Overhead Guard HeightP | mm | 2450 | ||
| 轉彎半徑 Turning Radius(outsiade)W | mm | 3500 | ||
| 性能 Performance | 滿載/空載Full load/No load | 行駛速度 Travel Speed | km/h | 26/29 |
| 起升速度 Lift Speed | mm/s | 370/400 | ||
| 最大爬坡度 Max.Gradeability | % | 20 | ||
| 自重 Service Weight | kg | 8000 | ||
| 底盤 Chassis | 輪胎 Tyre | 前輪 Front | 8.25-15-14PR | |
| 后輪 Rear | 8.25-15-14PR | |||
| 輪距 Tread | 前輪 FrontS | mm | 1470 | |
| 后輪 RearT | mm | 1700 | ||
| 軸距 WheelbaseL | mm | 2500 | ||
| 最小離地間隙 | 門架 MastG | mm | 200 | |
| 動力單位與控制 Drive units & control | 蓄電池 Battery | V/AH | 24/160 | |
| 發動機 Engine | 型號 Model | 錫柴xichai CA6110 | ||
| 額定輸出功率/轉速 Rated output/r.p.m | kw/r.p.m | 83/2000 | ||
| 額定扭矩/轉速 Rated torque/r.p.m | Nm/r.p.m | 450/1400-1500 | ||
| 汽缸數量 NO.of Cylinder | 6 | |||
| 缸徑×行程 Bore×Stroke | mm | 110×125 | ||
| 排氣量 Displacement | L | 7.127 | ||
| 變速箱 Transmissions | 傳動方式 Type | 動力換擋 | ||
| 檔位 Stage (前/后 FWD/RVS) | 1-1 | |||